1 / 4
GMC Miter Saw Dust Collection Upgrade & Hose Adapters — zdjęcie 1
1 / 4

GMC Miter Saw Dust Collection Upgrade & Hose Adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust extraction kit for GMC miter saws, featuring a main blade chute, an under-plate deflector, and vacuum hose adapters

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tired of sawdust blowing everywhere? This set includes custom-designed components to overhaul and maximize dust extraction on GMC miter saws.

  • Upgraded Blade Dust Chute: Replaces the stock metal plate behind the saw blade for far better sawdust capture.

    • Modification Note: Includes an added mounting tab with holes on the left side for higher rigidity. Requires drilling and tapping corresponding holes in your saw frame.

    • Pro-Tip: Glue or attach a flexible silicone sheet flap to the lip to extend collection without interfering with stock travel.

  • Vacuum Hose Adapters (Straight & 15° Angled): Adapts the factory saw outlet directly to a standard shop vac hose.

    • Saw Connection: OD 1.74" (44.25mm) | ID 1.55" (39.5mm) — 1.375" insert depth

    • Hose Connection: OD 2.50" (63.5mm) | ID 2.31" (58.7mm) — 1.50" insert depth

    • Total Adapter Height: 2.875" (73mm)

  • Under-Plate Deflector Chute: A press-fit chute designed to sit beneath the base plate, redirecting stray lower debris upward into the primary dust stream.

    • Dimensions: 2.50" L x 0.85" H x 1.50" Front Width (tapering to 0.90" Rear Width) | 0.50" Gap

Print Settings:

  • Orientation: Print flat on the bed using the broadest stable face. No support material required.

  • Material: PETG, ABS, or ASA recommended for shop durability and impact resistance. PLA works for light duty but may creep over time under hose strain.

  • Layer Height: 0.16mm - 0.20mm

  • Wall Loops / Perimeters: 4+ walls (Crucial for strength on mechanical hose fittings).

  • Infill: 20% - 30% (Gyroid or Grid).

Explore More Workshop Upgrades

Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:

Tagi