BMW X5 E53 Rear Window Wiper Delete Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed specifically for the BMW X5 E53 to cleanly seal the hole left after removing the rear window wiper.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Standard Digital File License
Designed specifically for the BMW X5 E53 to cleanly seal the hole left after removing the rear window wiper.
The plug features a 28 mm threaded section and a 35 mm outer flange, providing a clean and low-profile finish on the rear glass. A separate rubber O-ring is required to create a proper seal.
Important: A suitable rubber O-ring is required and is not included with the STL file.This is an independent aftermarket 3D-printable design and is not affiliated with or endorsed by BMW.
Recommended material: PETG, ASA or ABS for exterior automotive use.
STL files are for personal 3D printing use only unless otherwise stated in the license.