BMW X5 E53 Rear Window Wiper Delete Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed specifically for the BMW X5 E53 to cleanly seal the hole left after removing the rear window wiper.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Standard Digital File License
Designed specifically for the BMW X5 E53 to cleanly seal the hole left after removing the rear window wiper.
The plug features a 28 mm threaded section and a 35 mm outer flange, providing a clean and low-profile finish on the rear glass. A separate rubber O-ring is required to create a proper seal.
Important: A suitable rubber O-ring is required and is not included with the STL file.This is an independent aftermarket 3D-printable design and is not affiliated with or endorsed by BMW.
Recommended material: PETG, ASA or ABS for exterior automotive use.
STL files are for personal 3D printing use only unless otherwise stated in the license.