1 / 3
Grejig System: Bit Holder — zdjęcie 1
1 / 3

Grejig System: Bit Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bores for 1/4 inch hex bits

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bores for 1/4 inch hex bits, sized across corners so they actually drop in.

Clips onto an IKEA GREJIG wall grid with no screws, no glue and no extra

hardware — tilt it on and it snaps home.

Supports ON — tree (auto), 45 degrees. Print standing as supplied. The clip's over-hook overhangs whatever else does, so this is not optional.

Compatible with IKEA GREJIG. Not affiliated with, endorsed by, or sponsored by Inter IKEA Systems B.V.

Tagi