Grejig System: Air Duster Holder (
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
46.5mm diameter, dimple to 49mm for button passthrough
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A closed collar for a cordless air duster with a 46.5 mm handle. The handle drops down through it and the duster's body lands on the top face, so the weight sits on the ring rather than on friction. A concave dimple down one side clears the button. ONE collar, mounted low - the two side buttons need a 49 mm clear run.
Clips onto an IKEA GREJIG wall grid with no screws, no glue and no extra
hardware — tilt it on and it snaps home.
Supports ON — tree (auto), 45 degrees. Print standing as supplied. The clip's over-hook overhangs whatever else does, so this is not optional.
Compatible with IKEA GREJIG. Not affiliated with, endorsed by, or sponsored by
Inter IKEA Systems B.V.