1 / 2
Grejig System: Air Duster Holder ( — image 1
1 / 2

Grejig System: Air Duster Holder (

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

46.5mm diameter, dimple to 49mm for button passthrough

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A closed collar for a cordless air duster with a 46.5 mm handle. The handle drops down through it and the duster's body lands on the top face, so the weight sits on the ring rather than on friction. A concave dimple down one side clears the button. ONE collar, mounted low - the two side buttons need a 49 mm clear run.

Clips onto an IKEA GREJIG wall grid with no screws, no glue and no extra

hardware — tilt it on and it snaps home.

Supports ON — tree (auto), 45 degrees. Print standing as supplied. The clip's over-hook overhangs whatever else does, so this is not optional.

Compatible with IKEA GREJIG. Not affiliated with, endorsed by, or sponsored by

Inter IKEA Systems B.V.

Tags