1 / 2
OpenGauge Card: a pocket gauge for screws and nuts — zdjęcie 1
1 / 2

OpenGauge Card: a pocket gauge for screws and nuts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Open source pocket gauge for M2 to M8 screws and nuts. FreeCAD source included, CC0. 88 × 55 mm, fits in a wallet.

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
1
Wyświetlenia
108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

OpenGauge Card: a pocket gauge for screws and nuts

Stop guessing in front of your hardware bin. The OpenGauge Card lets you identify a screw's diameter and length in seconds, from M2 to M8, with dedicated test holes for nuts in the same range. At 88 × 55 mm, just a touch wider than a credit card, it still fits in a pocket, a drawer or even a wallet.

Why another one?

This model is heavily inspired by the excellent M-Card by MasterCake. I was simply looking for a fully open source equivalent: editable source files and a truly permissive license, so I could adapt it to my own needs and let others do the same. I could not find one, so I built mine from scratch.

What you get

The FreeCAD source file, not just the STL, so you can edit, resize or fork it freely

Released under CC0: public domain, no attribution required, no strings attached

Two print profiles: AMS for automatic multicolor, and a manual profile that inserts a pause in the second to last layer so you can swap filament by hand and still get a clean two color result

Printing notes

The text is readable with a 0.4 mm nozzle, but a 0.2 mm nozzle gives a much cleaner result. No supports needed. You can also simply print it in a single color and run a permanent marker over the raised text, then wipe the surface clean: the ink stays in the engraved areas and the markings pop just as well.

Parameters for 0.4 nozzle:

  • Quality:

    • wall generator: Arachne

    • minimum wall width: 60%

    • minimum feature size: 10%

    • minimum wall length: 0.1 mm

  • strength:

    • Walls

      • wall loops: 1

    • Infill

      • Sparse infill density: 5%

      • Sparse infill patern: Gyroid

Print it once, keep it within reach. Credit where it is due: thanks to Ghulaschsuppe for the original idea. If you prefer the original version, go and support it there.

Tagi