1 / 2
OpenGauge Card: a pocket gauge for screws and nuts — image 1
1 / 2

OpenGauge Card: a pocket gauge for screws and nuts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Open source pocket gauge for M2 to M8 screws and nuts. FreeCAD source included, CC0. 88 × 55 mm, fits in a wallet.

Rating
0 / 5
Likes
5
Downloads
40
Makes
1
Views
108
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

OpenGauge Card: a pocket gauge for screws and nuts

Stop guessing in front of your hardware bin. The OpenGauge Card lets you identify a screw's diameter and length in seconds, from M2 to M8, with dedicated test holes for nuts in the same range. At 88 × 55 mm, just a touch wider than a credit card, it still fits in a pocket, a drawer or even a wallet.

Why another one?

This model is heavily inspired by the excellent M-Card by MasterCake. I was simply looking for a fully open source equivalent: editable source files and a truly permissive license, so I could adapt it to my own needs and let others do the same. I could not find one, so I built mine from scratch.

What you get

The FreeCAD source file, not just the STL, so you can edit, resize or fork it freely

Released under CC0: public domain, no attribution required, no strings attached

Two print profiles: AMS for automatic multicolor, and a manual profile that inserts a pause in the second to last layer so you can swap filament by hand and still get a clean two color result

Printing notes

The text is readable with a 0.4 mm nozzle, but a 0.2 mm nozzle gives a much cleaner result. No supports needed. You can also simply print it in a single color and run a permanent marker over the raised text, then wipe the surface clean: the ink stays in the engraved areas and the markings pop just as well.

Parameters for 0.4 nozzle:

  • Quality:

    • wall generator: Arachne

    • minimum wall width: 60%

    • minimum feature size: 10%

    • minimum wall length: 0.1 mm

  • strength:

    • Walls

      • wall loops: 1

    • Infill

      • Sparse infill density: 5%

      • Sparse infill patern: Gyroid

Print it once, keep it within reach. Credit where it is due: thanks to Ghulaschsuppe for the original idea. If you prefer the original version, go and support it there.

Tags