Bota bag upper cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the small upper cap for a bota bag waterskin.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
There is a very common design for bota bags (a leather-covered pouch for carrying water to drink): two side panels of tan suede leather with a grey vinyl band between them, and red vinyl piping, with a two-part black plastic cap. I do not know if all bags that look like this use exactly the same caps, but I do know that this cap fits the pair that I purchased at a thrift shop (see photo).
This is the smaller, upper cap.
I recommend printing vertically, with the attachment eye at the top, and using supports. The 3mf model has painted-on support regions created in PrusaSlicer. Automatic supports from the build plate would probably also work. I printed in PETG with 0.15mm layers, 15% infill.
The CAD is available at OnShape: https://cad.onshape.com/documents/316916554b31517ce132d4ae/w/3f370daa3b9eee6ca48f4587/e/a38f8bdf25269248d19c39de?renderMode=0&uiState=6a84bcf205d303ccae318b9e