1 / 3
BMW F25 – Rear Tail Light Clip Fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clip for the rear tail light access cover on BMW F25. Maybe works with other BMWs also?
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
On my F25, one of the snap-fit mounting clips on the rear tail light for the access cover (where the bulbs are) had broken off.
I designed and printed a replacement part that can be attached to tail light.
The part is designed to be screwed in place using short 3 mm diameter screws and glued for additional strength. This combination has worked very well in my car.
Printing
Printed with Fiberlogy ABS Easy filament.
I increased the number of top and bottom layers to make the part 100% solid.