1 / 5
IKEA Olov mounting flange
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mounting flange for IKEA desk leg to replace missing ones
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to make simple desk with already owned IKEA Olov legs but I was missing some mounting plates. Those mounts does not utilize thread for screw-on but as pin for additional stability. Went surprisingly stiff.
Printing settings:
Filament: SUNLU PETG
Perimeters: 4
Layer height: .16 - .2
Infill type - Gyroid/Cross Hatch for best strength
Infill: 15%
