Linear rail MGN15 Parking Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Special Version for THK RSR15ZM Carriage
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1.1
Attention, this are not the normal linear rail like
https://www.printables.com/model/201162-mgn-linear-rail-model-collection
Look to the profiles from the rails befor you print.
History: I got 3 linear rails full with 31 carriages.
Now I need a parking solution for the carriages.
So I made them new with FreeCAD 1.1.3.
Under VarSet you could change some parameter:
Quantity means how many Carriages are on the Rail
Carriage Length ist how long is one Carriage (incl. Protect Hose)
On the Pictures you see one and two Carriages.
And here is the Profile from the Rail:
The length changed automatility when you changed the Quantity
and/or the carriage length, look into MGN_Long from VarSet.
Here is a little formula for the length, the 5mm are for the screw.
You could read this on the bottom of the rail too.
Tip: Put the grease nipples in direction to the printed end.
You need M3x6 or M3x8 or M3x10 Inbus Screws to fix the Carriages
Made with:
Nozzle: 0.4mm
Layer: 0.2mm
Support: No
Filament: PETG or PLA