HiLux SR5 sports bar caps/collar/cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I replicated the collars on the roll bar of my HiLux to replace the OEM covers that have decayed. Printed in PETG.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed for weather protecting the tub with the cover.
I would recommend to print this out of ASA or PETG if no other coat is applied as it will be in the elements.
Any help to remix this to make printing easier without supports would be appreciated.
I haven't made models for the front two covers of the sports bar as they have not fully decayed, however the rear models may fit over. Little modification to the model would be needed for the front. This was made for my HiLux SR5 2003 but may fit other models (1997-2005).