ABRAMS A1M2 TANK, 1/20 SCALE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tank was built on a 1/20 scale. All STL files have been uploaded.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 799
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
3D MODEL DESCRIPTION
This tank was built on a 1/20 scale. All STL files have been uploaded. I built my own project using an ESP32 and a PS4 controller, but you can also use a different electronic control system if you prefer. I’ve also shared all the code, parts list, and circuit diagram files via the GitHub link.
https://github.com/sozelsters/Abrams-A1M2-Project.git
Youtube:
3D PRINTING SETTINGS
I used PLA filament for my 3D prints. For general parts, I used 15% infill, two walls, and supports where needed. For delicate moving parts, I used 100% infill, four walls, and supports.