1 / 11
Snapmaker U1 TopCover exhaust with double filtration — zdjęcie 1
1 / 11

Snapmaker U1 TopCover exhaust with double filtration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Exhaust for the original Snapmaker TopCover that is lacking filtration.

Ocena
4,5 / 5
Polubienia
15
Pobrania
67
Wydruki
1
Wyświetlenia
446
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

this my first upload and take on the missing filtration for the Snapmaker U1 TopCap exhaust. 

It is a 2 stage filtration with a 80x40x15 hepa filter and 3 carbon filter sections, like the BentoBox.

I glues the pieces together and added 4x1.6mm magnets for the door and the carbon filter basket.

The seal is from the original installed piece. 

Edit: Updated version of the housing and door added, so the hepa filter sits after the carbon filter to prevent exposure of carbon pieces into the room.

Tagi