1 / 4
Century Graphic Lens Board - Polaroid COPAL MP-4 (2x3 Baby Graflex) — zdjęcie 1
1 / 4

Century Graphic Lens Board - Polaroid COPAL MP-4 (2x3 Baby Graflex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a Polaroid COPAL MP-4 Shutter to a 2x3 Crown Graphic, Century Graphic Camera. Experiment with exotic optics.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A 3D-printable lens board for mounting a Polaroid COPAL MP-4  Shutter  on a Baby Graflex / 2¼ × 3¼ Century / Crown Graphic camera.

The MP-4 shutter is a variant of COPAL PRESS that has no aperture. Originally it was part of the MP-4 system, designed to front mount M40x0.75 threaded, short conjugate lenses like the Tominons with it's own iris.

This model, together with an appropriate adapter, it is possible to mount the original Tominons or experiment with mounting your choice of optics to the front.  

I have included a front mount adapter template in 3mf and STEP format, you can add your own hole or threads.  A few adapters I have already designed is also included.

In a future update I will add rear mount adapter template and also any adapters I designed under a separate model.

Application Notes:
- Tested with PLA and PETG
- Print camera side up. 
- 0.20mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm.  That might limit the focal lengths you can actually use on this camera. 

Tagi