Phone charger mounting for Sprinter with horizontal slat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed mounting piece for phone holders on Sprinter vans that don't have fan vents that you could mount it to.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried Damian's version, but it was missing a horizontal slat, which is required by some phone mounts, so I made this with one horizontal slat. Also the slats were a little thick so I made the horizontal one a bit thinner.
Also some phone mounts attach by hooking to the back of the air vent, and the thickness might be a bit too much for them, so I adjusted the middle vertical one to have an angled back edge.
Damian's version has one for the right side too, I didn't need one so this is just the left one (driver's side for most of the world). For UK/India/Aus/etc or just for passanger side: flip the model in the slicer.