Phone charger mounting for Sprinter with horizontal slat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed mounting piece for phone holders on Sprinter vans that don't have fan vents that you could mount it to.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I tried Damian's version, but it was missing a horizontal slat, which is required by some phone mounts, so I made this with one horizontal slat. Also the slats were a little thick so I made the horizontal one a bit thinner.
Also some phone mounts attach by hooking to the back of the air vent, and the thickness might be a bit too much for them, so I adjusted the middle vertical one to have an angled back edge.
Damian's version has one for the right side too, I didn't need one so this is just the left one (driver's side for most of the world). For UK/India/Aus/etc or just for passanger side: flip the model in the slicer.