ADXL-mounted Cable Clip for Stealthburner - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable clip for mounting to the ADXL sensor location on Stealthburner. Cable diameter parametric for cables up to 5mm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Just a simple clip for cables 5mm or thinner, so they can be routed over where the ADXL sensor would normally go. Perfect for when the internal cable channel doesn't have room to route another cable, or the internal channel isn't in a good location for what you are trying to connect. This clip lets you route the cable such that it stay behind the body of the Stealthburner tool head, while also keeping it out of the way of the XY joints when the tool head goes all the way to the left side.
Mounting hardware
M3x6 BHSC, QTY: 2
To adjust the size of the cable this clip supports, simply open the provided Fusion archive, and change cable_diameter to the desired diameter.
To print, I suggest using the provided 3MF as a jumping off point. The drawback of this model is that it does require supports, so I made sure to play around with them a bit.
