Blind Valance Clip for Hunter Douglas Blinds (2.5 Inch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2.5 inch Blind Valance Clip for Hunter Douglas Blinds (Country Woods Classics model)
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
This clip was made from a scan of a Hunter Douglas Country Woods Classic blind valance clip (2.5 inches). I had several that were broken that needed replacing. I made this to be an exact replica of those (added a slight chamfer on both sides to eliminate elephants foot). Tried printing these in PLA which worked for a while but those too get brittle over time. PETG in my opinion would be the best material to print these with. The clip measures around 2.5 inches from top to bottom from the inside of the clip (where the valance goes).