Creality K1 SE Anti-Sag Chain Link Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of ViniS's Chain Link Riser Extended to fit the K1 SE's unique mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nobody had one so I just made one on TinkerCAD in about 5 minutes. I cut out L 7.4mm x W 7.4mm x H 6.2mm to fit the K1 SE's print head mount. You will need either a M3x12mm (preferably with a washer) or the stock screw and a ton of washers/nuts. Reinforced the bottom side of the riser mount to be slightly thicker as the cut out made the original walls too thin.
Print in PETG, but I guess PLA would work in a pinch, but I wouldn't trust it.
3 walls and 50% infill with tree supports (I used hybrid, but normal tree would probably work).