1 / 3
Creality K1 SE Anti-Sag Chain Link Riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of ViniS's Chain Link Riser Extended to fit the K1 SE's unique mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 1
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Nobody had one so I just made one on TinkerCAD in about 5 minutes. I cut out L 7.4mm x W 7.4mm x H 6.2mm to fit the K1 SE's print head mount. You will need either a M3x12mm (preferably with a washer) or the stock screw and a ton of washers/nuts. Reinforced the bottom side of the riser mount to be slightly thicker as the cut out made the original walls too thin.
Print in PETG, but I guess PLA would work in a pinch, but I wouldn't trust it.
3 walls and 50% infill with tree supports (I used hybrid, but normal tree would probably work).