V2 - Large 7 segment display for addressable LED strip (175 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2 of https://www.printables.com/model/1269492 - Using fasteners instead of glue and emphasis on modularity
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2 of https://www.printables.com/model/1269492
Reworked the housings to use M3 countersunk fasteners instead of hot glue.
Added a frame mounting system to link the segments together, instead of hot glue. Segments are hooked and secured to the frame using the mounting hook and an M5 fastener.
Reworked internal wiring for better power distribution (see photos).
I recommend printing the segments separately from the housings and pushing them in, rather than print-in-place unless you have a tool changing printer. It's not worth the excess flush waste. Some glue is allowed to secure the segments to their housings ;-)
Note: Photos show older revision of frame assembly without hanger holes.