V2 - Large 7 segment display for addressable LED strip (175 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version 2 of https://www.printables.com/model/1269492 - Using fasteners instead of glue and emphasis on modularity
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2 of https://www.printables.com/model/1269492
Reworked the housings to use M3 countersunk fasteners instead of hot glue.
Added a frame mounting system to link the segments together, instead of hot glue. Segments are hooked and secured to the frame using the mounting hook and an M5 fastener.
Reworked internal wiring for better power distribution (see photos).
I recommend printing the segments separately from the housings and pushing them in, rather than print-in-place unless you have a tool changing printer. It's not worth the excess flush waste. Some glue is allowed to secure the segments to their housings ;-)
Note: Photos show older revision of frame assembly without hanger holes.