1/10 RC CVD Boot Silicone Molds (HSP Drive Shaft Protection + STEP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric silicone casting molds to produce durable, scale CV boots for 1/10 RC cars. Prevents drive shaft wear, seals
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric silicone casting molds to manufacture high-durability, scale CV boots for 1/10 RC drift and touring cars (specifically designed around HSP drive shafts/dogbones and drive cups).
These silicone boots seal in grease, protect metal joints from abrasive dirt and dust, and give the undercarriage an authentic factory-scale look.
FEATURES:
- Zero rotation drag (rotates synchronously with the drive shaft assembly)
- Optimized geometry to prevent binding with suspension arms or shocks
- Clean demolding when printed in PETG (no mold release agent required)
- Full CAD source files included (.STEP) for easy tweaking
MANUFACTURING RECIPE:
1. Material: Shore 40A two-component RTV silicone.
2. Color: Mix a small amount of fine candle soot/lampblack into Part A before adding the catalyst to achieve an authentic matte black rubber finish.
3. Mold Printing: Print internal/external molds in PETG with 0.12–0.16mm layer height.
4. Casting: Fill the outer mold, insert the core, tap to release air bubbles, and let it fully cure.
