1/10 RC CVD Boot Silicone Molds (HSP Drive Shaft Protection + STEP)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric silicone casting molds to produce durable, scale CV boots for 1/10 RC cars. Prevents drive shaft wear, seals
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric silicone casting molds to manufacture high-durability, scale CV boots for 1/10 RC drift and touring cars (specifically designed around HSP drive shafts/dogbones and drive cups).
These silicone boots seal in grease, protect metal joints from abrasive dirt and dust, and give the undercarriage an authentic factory-scale look.
FEATURES:
- Zero rotation drag (rotates synchronously with the drive shaft assembly)
- Optimized geometry to prevent binding with suspension arms or shocks
- Clean demolding when printed in PETG (no mold release agent required)
- Full CAD source files included (.STEP) for easy tweaking
MANUFACTURING RECIPE:
1. Material: Shore 40A two-component RTV silicone.
2. Color: Mix a small amount of fine candle soot/lampblack into Part A before adding the catalyst to achieve an authentic matte black rubber finish.
3. Mold Printing: Print internal/external molds in PETG with 0.12–0.16mm layer height.
4. Casting: Fill the outer mold, insert the core, tap to release air bubbles, and let it fully cure.
