1 / 9
Foppapedretti "Lo Stiro" Magnet Bracket / Support Reinforcement — zdjęcie 1
1 / 9

Foppapedretti "Lo Stiro" Magnet Bracket / Support Reinforcement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Structural reinforcement bracket designed specifically for the Foppapedretti "Lo Stiro" folding ironing board cabinet.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a structural reinforcement bracket designed specifically for the Foppapedretti "Lo Stiro" folding ironing board cabinet.

The original cabinet housing for the door magnet is made of particle board (truciolato), which frequently cracks, strips, or weakens over time due to the constant pulling force of the magnet. This bracket reinforces the weak mounting area, distributing the mechanical stress, preventing further damage, and restoring perfect door closure.

Unlike permanent glue fixes, this bracket fully preserves the original magnet adjustment system. You can still slide or tune the magnet's depth/distance to perfectly align the door pull and ensure a tight, flush closure.

Hardware Needed

3x Countersunk flat-head screws: 3.5mm x 20mm

Recommended 3D Printing Settings

To withstand the continuous pulling force of the door magnet without cracking, use these high-strength settings:

  • Material: PETG (Highly recommended for durability and impact resistance).

  • Orientation: Place the model exactly as shown in the preview picture.

  • Infill: 100% (Crucial for maximum structural strength and solid screw gripping).

  • Wall Loops / Perimeters: 4 walls (Prevents the countersunk screw heads from splitting the print).

  • Supports: On build plate only (Use Organic / Tree supports for clean surfaces and easy removal).

Installation Instructions

  1. Remove the original loose magnet and clean any loose particle board debris from the damaged area.

  2. Slide the original magnet into the 3D-printed bracket first.

  3. Position the bracket (with the magnet already inside) over the cabinet mounting spot.

  4. Secure the assembly firmly into the cabinet using the three 3.5x20mm countersunk screws.

  5. Adjust the magnet's distance/depth as needed.

Feedback and makes are highly appreciated!

Tagi