Toyota Corolla (2023) Cup Holder Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises the floor of a too-deep cup holder so a small cup sits higher; pull the lid out for full depth.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
The small front cup holder in a 2023 Corolla is deep enough that a small cup, like a coffee cup, sits low inside it and is annoying to fish back out. This two-part insert fixes that. A shell raises the floor of the cup holder, and a honeycomb lid sits on top so a small cup rests higher and is easy to grab.
If you need the full depth back for a tall cup or bottle, lift the lid out using the finger cutout in its rim.
Print settings: PETG (recommended, since PLA can soften in a hot car), 0.15mm layers, 0.4mm nozzle. Shell takes about 2h7m, lid about 35m.
Compatibility: designed and test-fitted in a Toyota Corolla (2023).