Toyota Corolla (2023) Cup Holder Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raises the floor of a too-deep cup holder so a small cup sits higher; pull the lid out for full depth.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The small front cup holder in a 2023 Corolla is deep enough that a small cup, like a coffee cup, sits low inside it and is annoying to fish back out. This two-part insert fixes that. A shell raises the floor of the cup holder, and a honeycomb lid sits on top so a small cup rests higher and is easy to grab.
If you need the full depth back for a tall cup or bottle, lift the lid out using the finger cutout in its rim.
Print settings: PETG (recommended, since PLA can soften in a hot car), 0.15mm layers, 0.4mm nozzle. Shell takes about 2h7m, lid about 35m.
Compatibility: designed and test-fitted in a Toyota Corolla (2023).