Shop Vac Narrow Crevice Tool v02 - 2 1/4" Hose x .6" wide crevice,
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New Version, v02. Narrow crevice tool for Shop Vac's with a 2-1/4" hose, can be used with crevice extension
- Ocena
- 0 / 5
- Polubienia
- 93
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update:
I created a v02 of the Crevice Tool, with a slightly greater taper to provide a better fit with the Crevice Tool Extension. If you don't need the extension, use whichever you prefer.
If you wish to use this with the extension, be sure to download the extension with the same version number.
Hi all,
Here is a crevice tool for Shop Vac's that take 2-1/4" accessories. I needed a crevice tool for cleaning between my car's seats and console, that was narrower than most of the others I've seen (or downloaded) here, so I whipped one up that will it into a 5/8" (16mm) gap.
This thing works really well!
A couple features that I found extremely useful:
1) I put a serrated edge on the nozzle opening, this ensures that air will always flow thru the nozzle, which reduces the chance that a floor mat sucked up against the nozzle and stop flowing air.
2) the serrated nozzle, along with the improved airflow makes it much more effective at scrubbing dirt and fibers and such out of the carpet more effectively.
3) the end of the nozzle is tapered so that you can add a crevice extension (or several) to reach much harder-to-reach areas of a car or truck (or whatever you are cleaning)
I printed in PETG
3 walls all around, 20% infill
PLA will work fine, but I found that I might scrub a bit of PLA onto my car's carpets if was aggressive with any of the other nozzles I've used, but PETG seems a better choice, if you have a choice.
I will load up the extension for this crevice tool after I print another that is not already dirtied up.
Hope you like!
Thanks!