Sunset Riders PCB Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Sunset Riders and other Konami "TMNT2-Based" arcade PCBs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The design of this case is taken from Robertguy09's Aliens PCB case.
This case is for “TMNT2-Based” PCBs including Sunset Riders, Parodius Da, Rollergames, Surprise Attack, and of course, Teenage Mutant Ninja Turtles II. A full list can be found here.
This board is very similar in dimensions to the “TMNT-Based” board used in the original Aliens case this case is based on. The main difference is that the TMNT2 board has a big heat sink right on the edge of the PCB that makes the old case not fit.
Like the original case, you will need the following to put it together:
4 - m3 x 5.7 threaded inserts
4 - m3 x ~16mm screws
I also added a spot to place a sticker label meant to fit a CPS2-format label at 103mm by 144mm.
There are spots on the bottom for 25mm circular rubber feet
This case isn't perfectly designed and does have some flaws to keep in mind:
Circular hole for Alien's volume dial is still in place and there's no properly aligned holes for the dials on the Sunset Riders board
Hole for the 3P/4P harnesses is slightly misaligned