Better Nozzle Wipe Gcode for Longer Creality Anycubic Alphawise Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some gcode to help clean your nozzle more completely prior to printing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Some gcode to drop in your Machine start G-code text area when looking at your Printer settings window for your selected nozzle in Bambu or Orca slicer. This was designed to work with a Longer LK4, but should be compatible with pretty much any basic printer with no case lights or anything fancy. The important part of the wipe code are all of the xy move instructions. It just moves kind of slow and scrubs back and forth for about 90mm before doing a faster last little extrude and wipe.
One thing of note is that it puts your nozzle 0.24mm away from your bed while the nozzle warms up so if you have a sheet or some material that is sensitive to heat over a longer duration, maybe adjust the nozzle warm up Z height to something a little higher. I use a glass bed and it hasn't been causing issues. This short of a z height has resolved my issue where filament was extruding out the nozzle while it heats up.
Confirmed to work with the following printers:
Anycubic Kobra Go
Anycubic Kobra 2 Max
Creality Ender 3 V2
Longer LK4
Should work with any basic printer like the above with a 220mm x 220mm bed. These printers don't have any case lights or anything else fancy to turn on during the machine start g-code sequence so you may need to modify it to suit your specific printer.
