1 / 17
ADKS - Ender 3 Pro/St Rear Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear Case or Front Case, Front Case or Rear Case, that's the question!
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 975
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (2)Kolekcje (29)Powiązane
Hi All,
Here is my design for a Ender 3 Pro/St rear case.
Additional information:
- Center positioned, with more internal room for better cable management.
- Side cable ducts.
- The motherboard is rotated 90 degrees to improve the SD/USB accessibility.
- 40x20 Fan installed vertically, without screws (airflow from the inside to the outside of the case).
- The case can also be installed on the front of the printer turning it into a front case.
- No supports are needed (please check out the slicing software pictures attached).
- The pictures show the case for the Ender 3 Pro version (wider Y-axis). For the Ender 3 Standard version, please check out the files with the final "S" in the name.
- Compatible with the Ender 3 stock motherboard and with other models with the same form factor (for example SKR mini e3).
- The case was designed to slide easily. If you want more grip, please add some tape on the side rails.
- Please note that the Z and Y End Stop connection cables must be swapped with each other
- A bunch of M3x8 screws is required.
A few more words:
I really love designing and 3D printing, and I am incredibly happy to see how some of my projects are particularly popular online. My designs will never be for sale, however, if you appreciate my design, please consider supporting me with a tip. Thank you!
Paypal.me link: https://paypal.me/adarkstudio
Cheers
Nio (Adarkstudio)