Mast gate for sailboat Sportina 680 / Clever 23
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Close the mast entry so you can lower the sail or reef without slugs getting out of the mast.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You need two instances of the mast gate section.
They fit vertically to cover the mast entry as shown in the picture. I printed with Elegoo PETG Pro. and I tuned the thickness and shape for its flexibility. The parameters should all be in the 3mf file.
I am new to 3D printing and I struggled a bit with the printing itself. I adjusted the part cooling fan speed down, the distance for the brim, I used the Arachne wall generator to reduce gaps and I did manually place the seam inside the part in an place where there is not much stress. I still didn't get it quite as I would have liked it. The layers look smooth but there are still some gaps (underextrusion?). However, the part is functional.