Baofeng G11s Dial Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dial guard for the G11s to prevent changing volume or power if you bump up against it. Glues into place with super glue.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a dial guard for the Baofeng G11S GMRS hand held radio.
Print as oriented. I printed in TPU with default settings and glued in place with thick/gap filling super glue.
This is designed to have space for gloves as well to actuate the dial without exposing it too much.
I used a pencil to mark where the edges of the guard end up so I could put the thick glue on the radio then put the guard in place. Don't go nuts with the glue so much it ends up in the dial. :)
Put in front of a fan while drying for 4+ hours. This air movement helps minimize the white CA vapor marks which can be left behind on the surface as the glue dries.