1 / 4
AS5600 Magnetic Encoder Mount for NEMA 23 with GX16 Connector — zdjęcie 1
1 / 4

AS5600 Magnetic Encoder Mount for NEMA 23 with GX16 Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosed AS5600 encoder holder, magnet riser and cover for NEMA 23 steppers; wiring through a panel-mount GX16

Ocena
0 / 5
Polubienia
4
Pobrania
14
Wydruki
0
Wyświetlenia
208
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution




What is this?


A fully enclosed AS5600 magnetic encoder mount for NEMA 23 stepper motors with panel mount GX16 connector.

Three printed parts do the work: the magnet riser carries the diametric magnet on the rear shaft, the sensor holder fixes the AS5600 breakout concentric to the shaft at a correct air gap, and the connector housing closes the assembly and carries a panel-mounted GX16 aviation connector, so the motor stays a single self-contained unit you can unplug and swap.

Hardware needed

  • 1× AS5600 breakout module and corresponding magnet

  • 1x GX16 aviation connector

  • 4× M3×18 or M3×20 screws

Tagi