AS5600 Magnetic Encoder Mount for NEMA 23 with GX16 Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosed AS5600 encoder holder, magnet riser and cover for NEMA 23 steppers; wiring through a panel-mount GX16
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution

What is this?
A fully enclosed AS5600 magnetic encoder mount for NEMA 23 stepper motors with panel mount GX16 connector.
Three printed parts do the work: the magnet riser carries the diametric magnet on the rear shaft, the sensor holder fixes the AS5600 breakout concentric to the shaft at a correct air gap, and the connector housing closes the assembly and carries a panel-mounted GX16 aviation connector, so the motor stays a single self-contained unit you can unplug and swap.
Hardware needed
1× AS5600 breakout module and corresponding magnet
1x GX16 aviation connector
4× M3×18 or M3×20 screws