Concrete filled 4" Subwoofer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A powerful 4" Subwoofer, filled with concrete for a better bass control.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a powerful passive 50W Subwoofer which uses the well known Dayton Audio TCP115-4 4" driver. It is mostly 3D printed and has an airflow optimized bass reflex port. The concrete Filled double wall provides a heavy structure for clean bass output. It is tuned to ~60Hz, but it is easily capable of going down to ~40Hz or lower.
And the best part? It only costs around 25€ to make!
BOM:
Part | |
|---|---|
Dayton Audio TCP115-4 | |
Speaker Gasket | |
M3 Heat-Set Inserts (16x) | |
M3x8 Button Head machine screws (4x) | |
M3x12 Countersunk machine screws (12x) | |
1,5mm² (AWG 16) Speaker Wire | |
Speaker Terminal (optional) | |
Concrete (or Epoxy Resin) | |
M3x12 self-tapping Screws (2x) |
Note:
The parts should be printed with 6 walls and at least 30% Gyroid infill
If you don't want to use the Binding Post Terminal, you can use the 3D printed wire outlet (like I did)
If you want to print the nice hexagon pattern in a second color, you can paint them with the bucket fill tool
Make sure you have a suitable Amplifier for the Subwoofer!
The Assembly Guide is in the Files Section!