1 / 2
Spider-Man Mask Keychain — Detailed 0.2 mm Print — zdjęcie 1
1 / 2

Spider-Man Mask Keychain — Detailed 0.2 mm Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mask, the webbing, and a loop that is part of the print.

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

The mask, the webbing, and a loop that is part of the print.

A compact Spider-Man mask keychain with the full web pattern cut into the surface, not just painted

on the front — the webbing wraps all the way round the head, so it reads from every angle on a

keyring. The loop is modelled into the top of the mask, so there is nothing to glue and nothing to

snap off; you just clip the ring straight through it.

Why you will like it

- Detail that survives — the web lines are cut deep enough to stay visible after a coat of paint,

and they run over the whole dome rather than stopping at the ears.

- One piece, no assembly — loop included. Add a split ring and it is done.

- Pocket-sized — about 50 mm tall, so it hangs on keys or a backpack without swinging like a

hammer.

- Looks great in any colour — classic red, matte black for a stealth-suit look, or a raw grey PLA

like in the photos.

- Easy paint job — the recessed webbing takes a wash beautifully — brush black over red and wipe

the high spots.

Print settings

- Nozzle: 0.2 mm — this is the one setting that matters. The whole model is built around a 0.2 mm

nozzle: the panel lines, the web lines and the loop all come out crisp. A 0.4 mm nozzle prints it,

but the fine detail turns mushy and the smallest cuts close up completely.

- Layer height: 0.1 mm (first layer 0.1 mm as well)

- Walls: 4 · Top shell: 7 layers · Infill: 15 % grid

- Supports: tree (auto), slim style, threshold 30°. The chin and the underside of the mask

overhang, so leave supports on; tree supports break away from the smooth dome cleanly.

- Brim: auto · Raft: none

- Material: PLA. Silk and matte both look good; matte hides the layer lines best.

- Outer wall around 120 mm/s. Slower does not buy you much at 0.1 mm, but a clean, well-levelled

first layer does.

Tagi