Spider-Man Mask Keychain — Detailed 0.2 mm Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mask, the webbing, and a loop that is part of the print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
The mask, the webbing, and a loop that is part of the print.
A compact Spider-Man mask keychain with the full web pattern cut into the surface, not just painted
on the front — the webbing wraps all the way round the head, so it reads from every angle on a
keyring. The loop is modelled into the top of the mask, so there is nothing to glue and nothing to
snap off; you just clip the ring straight through it.
Why you will like it
- Detail that survives — the web lines are cut deep enough to stay visible after a coat of paint,
and they run over the whole dome rather than stopping at the ears.
- One piece, no assembly — loop included. Add a split ring and it is done.
- Pocket-sized — about 50 mm tall, so it hangs on keys or a backpack without swinging like a
hammer.
- Looks great in any colour — classic red, matte black for a stealth-suit look, or a raw grey PLA
like in the photos.
- Easy paint job — the recessed webbing takes a wash beautifully — brush black over red and wipe
the high spots.
Print settings
- Nozzle: 0.2 mm — this is the one setting that matters. The whole model is built around a 0.2 mm
nozzle: the panel lines, the web lines and the loop all come out crisp. A 0.4 mm nozzle prints it,
but the fine detail turns mushy and the smallest cuts close up completely.
- Layer height: 0.1 mm (first layer 0.1 mm as well)
- Walls: 4 · Top shell: 7 layers · Infill: 15 % grid
- Supports: tree (auto), slim style, threshold 30°. The chin and the underside of the mask
overhang, so leave supports on; tree supports break away from the smooth dome cleanly.
- Brim: auto · Raft: none
- Material: PLA. Silk and matte both look good; matte hides the layer lines best.
- Outer wall around 120 mm/s. Slower does not buy you much at 0.1 mm, but a clean, well-levelled
first layer does.
