1 / 4
Receiver for sliding bolt latch - on small kennel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a strike plate, receiver, keeper - whatever you want to call it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The sliding latches on my kennel were not lining up due to it not being on a perfectly flat surface. So I made new ones that had a more tolerance. I did not try to reuse the old holes as I needed more adjustment than that. So I drilled 2 new holes and used some screws and nuts to install. Used on a cheap small 8x4x6 ft outdoor dog kennel I got on Amazon. See the link below if you are curious.
https://www.amazon.com/dp/B0BZJ44LR4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1