1 / 4
Receiver for sliding bolt latch - on small kennel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a strike plate, receiver, keeper - whatever you want to call it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The sliding latches on my kennel were not lining up due to it not being on a perfectly flat surface. So I made new ones that had a more tolerance. I did not try to reuse the old holes as I needed more adjustment than that. So I drilled 2 new holes and used some screws and nuts to install. Used on a cheap small 8x4x6 ft outdoor dog kennel I got on Amazon. See the link below if you are curious.
https://www.amazon.com/dp/B0BZJ44LR4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1