Counting matching models…
Hello all! Wanted to share this here and let you all know that this was a labor of love and would LOVE to see what yall can do with the blank pieces for different cases/games! The original design was meant specifically for tabletop TCG's,…
Description This is a Dutch signalkeeper house with the signal box attached to the house. I have used this model to experiment with the possibilities of my Prusa Mk4 printer. This is my first attempt to print the walls of a building in…
A simple key rack that is usually hung by the front door. The rack is made with a silhouette of a basset in his favorite
Description Tired of tangled leashes? This 3D-printed Dog Bone Leash Keeper provides a simple and stylish way to keep your dog's leash neatly wrapped and stored. Designed with heart-shaped clip points , this leash organizer allows you to…
Optimized for 28.6mm seat tube, but flexible enough to use on larger seat posts. Requires a zip tie and super glue for assembly. Designed to mimic old K-edge chain keepers; the print sits up next to your granny gear and prevents a chain…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
Pushrod Keeper for Turbo Timber Evolution / E-flite Timber – 1mm Pushrod Designed for: 1mm pushrod, suitable for 90° bent pushrods Infill: 100% Layer height: 0.12mm (for best performance) Material: PLA possible, PETG recommended for…
Перед вами интересная ключница, которую можно повесить дома возле выходной двери. Ключи всегда будут на виду и не потеряются. Для модели я использовала векторное изображение молодого лабрадора. Он показался мне очень милым. @Жду ваших…
Ever find yourself craving just one Pop-Tart (or any other toaster pastry), only to be left with its lonely twin sitting in an open foil wrapper, slowly turning into a cardboard-flavored tragedy? Yeah… we’ve all been there. Enter the Pop…
Something to keep my glasses handy when not on my head. Several versions, see files. No supports needed, print as pictured. Edit: Added "Portable" version to slide under things. Edit2: Added versions with spot for 2"/50mm circle adhesive…
Hello all! Wanted to share this here and let you all know that this was a labor of love and would LOVE to see what yall can do with the blank pieces for different cases/games! The original design was meant specifically for tabletop TCG's,…
Introducing the Artisan Fresh 3D Printed Cheese Keeper – a revolutionary way to store your favorite cheeses with style and convenience! Designed with innovation in mind, this unique container boasts smart print-in-place snaplocks for an…
Hello everyone! Thanks for stopping by again, I have made a few updates to the original print for the counter keeper and added a few features I figured out how to implement! Now it comes in four pieces and you can adjust the way that you…
In storage, you want to keep the doors open to prevent mildew, but not have them flailing around. This door keeper solution is for Dometic brand fridges with an upper freezer and lower fridge, with a 2" wide metal strip across the front.…
When I designed this cracker lifter to pull up only a few crackers (like Saltines) from this legacy container (RPI Stay Fresh, not available anywhere anymore), I was asked by others if I could design the container as well. So, I designed…
This is always a necessary and useful thing in the house — a wall-mounted key hanger. It constantly hangs in the hallway and prevents you from forgetting or losing your house keys. And if she's also beautiful, that's doubly nice! I named…
I made this model for use on some ceiling ethernet drops I ran for future use. I was up in the ceiling doing camera drops, and I added some extra drop for wireless access points later, I terminated to keystones, used a short patch cable…
I have suspended ceilings at home, and underneath them, there's already a molding for installing a recessed light fixture with springs. The problem is, the chandelier I needed didn't have such a fastener. I made a strip for an M5 nut. And…
Horned Reapers are amongst the strongest and most powerful creatures in Dungeon Keeper . They are also by far the most bellicose, murderous, and unstable: born to kill, they get very tetchy very quickly if left idle. As such, they are…
A drawer that is designed to keep your nails and screws from being missed.
a very simple USB-Keeper Keycap-Addon-thing. this addon is intended as an addon for the ikea Jerker USB-Keeper by Erik004 . as i kind of noticed that despite the glorious design of the usb-keeper, my keycaps were still not accounted for.…
A sweet chibi fairy sitting with big ears, tiny wings, and a flower crown, gently holding a heart close to her chest. Soft, rounded shapes and a calm pose make her perfect for cute fantasy décor, gifts, and cosy shelf displays.
I hate when straps flop around on backpacks. What more needs to be said? There are models for straps with the following widths and depths: 25mm x 2mm 20mm x 1.5mm If you need a different size, let me know the dimensions of your straps and…
This was designed to hold a 2-pound loaf of bread. Specifically for a Zojirushi bread machine, but I assume any oblong bread machine bread will fit in there. 130mm x 130mm x 260mm with a little extra on top for bread puff. 2 pieces just…
Squirrel Keeper Gnome 🐿🌲 Bring a touch of woodland magic to your prints with the charming Squirrel Keeper Gnome ! This friendly forest guardian stands proudly with his tiny squirrel companion nestled safely in his hands — a symbol of…
LED tealight holder in the shape of the Flame Keeper Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. Tree supports are quite easy to remove. My print settings(PLA): 0,2mm layers / 2walls /…
Components Boundless Voyage Telescopic Titanium Chopsticks (80mm long, ~7mm largest diameter) Keyring (ideally 1/2") Printing & Assembly This prints very straightforward. Print in TPU. No supports needed. I'd aim for 3-4 walls. Thread the…
Design Concept The Lion Keeper sculpture is meticulously crafted to convey strength and majesty, drawing artistic inspiration from the regal features of a lion. This piece serves as a protector and symbol of courage, ideally placed to…
Number 7 in the series. Once again it's compatible with parts of my other sabers. I opted to go without the switch module since it is already pretty long and has an auxiliary button anyways. So there is a Switchdelete module or you can go…
This is for my bespoke car mount for my OnePlus Open phone in landscape open orientation, to hold the USB cable to remove strain from the connector, which is the first thing that fails for me on most of my cell phones. The Open does not…
Have a broken watch strap retainer? This clip provides a quick, practical fix to keep your strap in place and under control—no need to replace the entire band.
Deutsch (Drachenhüter) Dieser passgenaue Einsatz für die Spieleschachtel von Drachenhüter sorgt für Ordnung und einen schnellen Spielaufbau. Das Set besteht aus zwei Elementen: Amulett-Halter: Speziell geformt für die gebogenen…
A strap keeper that can be attached to a strap without unstrapping the strap. Fold the strap in half and insert the outer edges into the open c-channel. Slowly work the ends into the channel while sliding the keeper up and down...…
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a remix of BlueChromis's Keeper of the Forbidden Wilds token,…
"Greetings, boils and ghouls!" Bring the legendary narrator of nightmares home with this high-fidelity, static-pose collector’s bust. This model captures the Crypt Keeper in his full "Tales" persona, emphasizing the extreme texture of his…
This is a clip to keep the IPX antenna connector from coming off during mounting and movement of your node.
Universal Tanleki Emulator Keeper (QR1 / QR1 Lite Remix) Credits & Inspiration This project is a remix and simplification of the QR2 Tanleki Emulator Keeper . Huge thanks to the original creator for the initial concept! This version has…
Enlarged the gaps on the original model so it would print reliably separable instead of as a single piece.
Hairdryer mount and cable keeper Uses M6 locknuts and M6 bolts (2 pairs each for mount and cable keeper)
A simple replacement free loop for the Garmin Forerunner 935 or any other Garmin with a 22mm band. Made in Fusion360, it is intended to be as true to the original as possible. Printing Instructions Print on its side for best results.…
Place a cheerful guardian in your zen garden. It can be used to shovel sand
If you have an aquarium then you understand the struggle to manage and bend cords. This print safely routes wires over the top of the tank with a visually pleasing, smooth bend. Revision 2 Revision 2 adds cord keepers with different…
I really appreciate you if you can consider a coffee for me if you like the design! ------- Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can…
Provides easy access to the filament on your second spool. Note: It is not intended to be fed through the filament keeper while printing. It's designed to help keep the filament handy, for the spool which isn't currently in use.
This is remix of Card Game Keeper by @Chris_171881 Card Keeper - Classic Cards Size Imagine that you're playing cards with your friends but the cards are all over the place and it's a terrible mess, well that ends now! You can organize…
"Embrace the spirit of the season with the 'Pumpkin Treat Keeper'—a charming 3D-printed pumpkin that stores all your sweet surprises. Perfect for candy, small trinkets, or simply as a decorative piece, this little pumpkin adds a playful…
No supports needed Pring in PLA or PETG does not matter Print with fine resolutions to have a product feel, a 0.3mm layer also prints well Wall thickness is optimized to keep the weight low so having 50% infill should not cost you a lot…
At my workplace, we have some cables that we connect to the computer for presentations, and people keep dropping them on the floor despite numerous requests, notices, and labels. So, I’m making one last attempt: creating a TED bear that…
if supported on one side the model should hold one book up even if it is hanging of the edge.
This slips over the tang on the cage of a Rans S-21 and adds lower guides to ensure the aileron cable stays in the groove on the small pulley below the seats. The little hole allows for an AN3-7A bolt. The big hole is to reduce material.
Why do you need this? I dunno. That's for you to decide. I made this for me for a specific need but figured others might like it. This is for doors between 1 ¼ inches and ~2 inches thick. See technical drawing for reference. This will be…
No more unstraps! Easy to print - no support needed! To use with 20mm/22mm (select appropriate file) 2.5mm thick straps / watch bands. FreeCAD file included. Update(2023-04-10): added STL for 22mm straps
Shop Vac Hose Cord Keeper There are many vac to cord keepers on Thingiverse, but none that will work with my set up. This is for a vac hose for a Porter Cable sander with a diameter of 1.300” and a power cord .300” in diameter Print and…
Parallel Keepers, stop your parallel from fall over in you vices used on a milling machine. Print four keepers, press in one magnet in to each. Magnets are round .375 in diameter X .125 thick. Feel free to modify in any way you feel fit.…
Hair tie keeper thingie. My wife is going to kill me once she sees I put a pic up of the retail one with her hair entangled, but this is what happens to all hair ties. They get hair in them.
Heavy: 3.5mm thickness , 25mm high Light : 2.5mm thickness , 15mm high
Print 2 of each object for a complete magnetic keeper. This is similar to the ones you see at the fly shop for $10 to $30, but those are usually made out of fancy machined, anodized aluminum. Requires 2 12mm x 6mm (1/2" x 1/4") neodymium…
Star nut M6 for fixating a stretcherboard or to put on a M6 latch of an oarlock (metric thread). you neet M6 nut to put inside for it to work.
Anello di sicurezza per cinturino orologio / watch strap keeper holder Dimensioni interne / Internal dimension 20,5 x 5,5 mm V 1 senza fermo / without stop V2 con fermo / with lock Va bene su cinturini di 20 mm di larghezza (testato su…
A place to keep your I voted Ø1.5" sticker. Sticks better to plastic than fabric. Will not leave sticky residue. Available with a Ø6mm pocket for a magnet (1mm deep) or with a pocket to place a 0.75 in bar pin. Use your slicer for a…
This is a replacement watch strap keeper, this one is a rough replica of the watch strap keepers that came with my Traser H3 P96 Outdoor Pioneer, please see the attached drawing to determine whether this component is suitable for your…
If you're looking for the perfect place to store your Zelda themed Uno deck, you've found it. I orient these on your printer so that the external-facing side is up. This requires supports and the print time is longer, but the finish is so…
Designed this floss keeper for my crafty friends and family. They required a holder to suit cross stitch projects. After printing I would recommend giving a light sand with fine grit (800 - 1600) sandpaper on both sides in order to get…
Dungeon Keeper 2 Coaster - For Single Extruder Dual-Color Printing Top Side: Features the iconic DK2 Horned Reaper design. Bottom Side: Displays the classic Bullfrog logo. Important Information If you see the warning: “A filament…
Introduction As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I was stoked to see the new addition to the game since the last Update. The Warden O`Brien v113 "Gravekeeper" or its new nickname the “Bonewagon”…
What more is there to say? It's something you can use to wrap your cables in before you throw it into your bag. It's a bit big compared to other cable winders, but I designed this mainly for thicker 4mm diameter cables. To use, stuff one…
This is my first design upload. I got asked by friends to design something to hide their dog's flea and tick collar underneath their fancy designer collars. I have version one on my own dog, which I haven't bothered uploading because it…
Da ich das Modell auf meinen Blumat, zur automatischen Bewässerung meiner Growtöpfe, setzen wollte. habe ich eine Kappe angezeichnet, damit sie den Verschluss verdeckt.
Stylish way to store a variety of salts, pepper or other spices. Lid easily opens for quick access while cooking or eating. Handy spoon nests inside box. Printed in wood PLA and then varnished Lid Black ABS 15% infill 3 Wall loops
Description This is a Dutch signalkeeper house with the signal box attached to the house. I have used this model to experiment with the possibilities of my Prusa Mk4 printer. This is my first attempt to print the walls of a building in…
print in TPU. no supports. 100% infill worked well for me. approx. 192mm long.
This is device keeps the USB dongle securely with a wireless headset. It was specifically designed for a HyperX Cloud 3, but should work perfectly with many other brands/models of wireless headsets. There are two versions, one with a…
a small piece that prevents the grippers from loosening if you rotate them, allowing you to set a specific tension and have it be maintained when turning the board
Just some coasters to place under the feet of your table to save your carpet, also can be used under chairs etc. you get the use. Place the spikes in the carpet.
changed the shape a bit so it can be grabbed easier. added a leash to keep it from running away. Made the cap tighter both on filament side for better hold and tube side for better air tightness. it's a good fit for the PTFE tube i got…
Card Game Keeper for Taco Cat Goat Cheese Pizza adjusted for the card size.
A simple and functional cardholder for your Visa, cash, or other cards. Files: [ slim_card_keeper.stl ]: Standard file for the cardholder. Printer and Print Settings: Printer : Artillery Sidewinder X2 Material : PLA Nozzle : 0.4mm Infill…
My wife has a bulky case for her iPhone and I have a Google Pixel phone, neither of which would fit in the stock model so I made it taller. The “bump” for the camera on her phone case also interfered with the phone being able to be…
For those who hot-melt chain wax. This is a series of parts to make a simple chain break-in device to help loosen up the stiff links of a chain after it has been waxed. Wholly inspired by @dac_201215 ( who made this ), a design that was…
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Ice hockey Goalkeeper - Stencil template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall…
EN: WATCH KEEPER -I created this model because the old one broke. -You can choose from 100% all the way up to 150% so it suits your needs. Print settings: 2 walls 0,2 mm layers 0,4 mm nozzle any infill you want (recommended 100%) CZ:…
Banana holder / stand. Good for 2 or more banana for longer banana freshness. If you want this look, pint on side and set bottom and top layer to 0. Version 2_0_0 is old one, good for glue. Version 3_0_0 is perfect like it is:-) Enjoy…
Here is a simple little insert for Dragonkeepers. Trays to store all the amulets in order. Box for expansion/promo or without. Sleeved cards box, though I haven't tested it myself. Print one of each file, only one card tray--choose…
These simple clips are designed for standard power cords with a cord diameter of approximately 6 - 9.5mm (and possibly larger). They are designed to be used in a situation where the loose length of a power cord is wrapped around some sort…
Remix of faultedlogic's Chuck Key Keeper for Harbor Freight 1/2" drill for the smaller chuck key that comes with these rotary tools. May work with similarly sized chuck keys. One side attaches to the electrical cord of the tool, other…
This fishing line keeper goes around your spool of fishing line to keep the line from unwinding. Designed to be used with ¼" wide elastic cord.
budova závorářského stanoviště ve velikosti 1:120
Marking this as a remix, although i ended up just creating my own model in its entirety. I wanted to do this because i had some custom D20's made for my wedding, and want to make a pendant necklace with one :) This can also be easily made…
Basic aid to keep tongs closed when put into drawer for space savings. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.20 Infill: 25% **Filament:** 3dwarhorse Pla Black Category:…
I often leave my phone in my workshop or office and forget where it is, and have to search around. I explored various wall-mounts but nothing really spoke to me. A particular issue is that I keep my smartphone in a leather-ish case, so…
A simple key rack that is usually hung by the front door. The rack is made with a silhouette of a basset in his favorite
