2020 T-Slot Cable Tie Anchor (Double Wrapped)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable Wrap holder for 2020 extrusion, v-slot profile
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I liked the original, but found that for a few of the cables I was using, having a second loop of hook and loop strap would be better. So, I added a second passthru in the model. This lets the cable be secured a little better, and just looks nicer.
While in there, I also made some quality of life improvements:
Changed the design of the anchor a little to keep it from getting loose on the extrusion
Set an orientation to how the clamp is inserted into the extrusion
Smoothed over some of the edges to reduce snagging and fraying on the straps
These are SNUG and will feel very tight when you first install them. These were designed for extrusion that will see a lot of high frequency vibration, so I wanted to make sure that these would not eventually work their way loose.