Meross MSG100 Stackable Extended Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stackable magnet system for the Meross MSG100 smart garage door opener.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Standard Digital File License
Positioning the door sensor on the Meross MSG100 can be a pain. In my case, without an extender of some kind, the included magnet was too far from the reed switch. I ended up creating a replacement magnet, but that required a lot of measuring, tweaking, and measuring some more. With this multi-part system, spacers can be stacked or removed to get things just right:
Pieces snap into place
Large stacks can be droopy, but don't be too hard on it. Everyone sags eventually
Designed for 30x10x3mm magnets
0.2mm layers in PETG recommended
Tips:
Magnets slide in, so glue isn't required, but a little bit couldn't hurt