DeskLoft Cable Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to print and emplace cable storage for the 'DeskLoft' monitor riser system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is part of my modular monitor riser ecosystem "DeskLoft", this cable storage add-on keeps cables, chargers, and small accessories off your desk and still easy to access.
It features tool-free installation and removal, and it's a non-permanent fixture. The mount is sized for boards roughly 19mm thick. (As my ecosystem is built around a normal pine 1x8 board from your local harware store.)
I also made a YouTube video about the design process, along with some showcasing. Check it out here:
Features:
Tool-free thumb screw attachment — print the screw, no hardware needed
Fits boards ~19mm thick
Designed to integrate with the rest of the modular monitor riser system (links to other parts below)
Clean and simple storage
Print settings:
Walls: 2-3
Infill: 15% Gyroid (or whatever you prefer)
Supports: Yes, whichever you prefer. Only for the Cable Storage file. NOT NEEDED FOR THE THUMB SCREW.
Print orientation: Check the .3MF file.
Assembly: Slide the mount onto the edge of your board and hand-tighten the thumb screw until secure, no need to crank it down. No glue or additional hardware required.
Check out the rest of the ecosystem on my page, or the links below: