1 / 5
Kobo Clara BW Sheet for Pop socket and silicon case — zdjęcie 1
1 / 5

Kobo Clara BW Sheet for Pop socket and silicon case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kobo Clara BW holder for silicone case with PopSocket, PETG, tree supports and elastic cord.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

English

This sheet/holder is designed for the Kobo Clara BW. It is intended only for use with a Kobo fitted with a silicone case and a PopSocket attached to the back.

Please note that I cannot guarantee that every silicone case will fit, as the dimensions and thickness can vary depending on the case.

For the elastic cord, I used a simple 1 mm elastic cord or slightly thicker. Depending on the cord you use, the hole in the small elastic-cord tab may need to be enlarged slightly.

I printed the part in PETG with tree supports without any problems.

Print orientation: horizontally, standing on the back edge of the Sheet.


Deutsch

Dieses Sheet / diese Halterung ist für den Kobo Clara BW gedacht. Sie ist ausschließlich für einen Kobo mit Silikonhülle und einem auf der Rückseite befestigten PopSocket vorgesehen.

Bitte beachten: Ich kann nicht garantieren, dass jede Silikonhülle passt, da sich Maße und Materialstärke je nach Hülle unterscheiden können.

Für die Gummikordel habe ich eine einfache 1-mm-Gummikordel oder eine etwas dickere Kordel verwendet. Je nach verwendeter Kordel muss das Loch in der kleinen Gummikordel-Lasche eventuell etwas vergrößert werden.

Ich habe das Teil mit PETG und Tree Supports ohne Probleme gedruckt.

Druckausrichtung: horizontal, stehend auf dem Rücken der Hülle.

Tagi