Simple 9V Battery Holder / Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple 9V battery holder that takes up very little extra space.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a minimalist design for a 9V battery holder. I often need to carry a spare 9V with me, but I don’t want to put one in my bag loose since it could short out against something. I tried a few other holders, but I really wanted something that took up minimal space, so I designed this one. This does the job using minimal filament and without being bulky. I printed this on an old MakerFarm Prusa i3V printer, so any modern printer should handle it.
My recommended settings are standard PLA with a 0.4mm nozzle and 0.2mm layer height. Orientation should already be right, but if not, align so the cavity is up and it should print fine without any supports.
Good luck and hope it works for you.