1 / 1
Heavy Duty Reinforced Replacement Cam / Lever Arm (12.5mm Hex Drive) — zdjęcie 1

Heavy Duty Reinforced Replacement Cam / Lever Arm (12.5mm Hex Drive)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy Duty Reinforced Replacement Cam / Lever Arm (12.5mm Hex Drive)

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A reinforced drop-in replacement for cast pot-metal lever arms / cam handles where the original thin hex collar cracked or sheared under torque.

Redesigned in Autodesk Fusion 360 with a solid 360∘360∘ reinforced collar (∅18 mm∅18 mm), generous stress-relief fillets, and exact tolerances.

Key Specifications:

  • Overall Dimensions: 70.0 mm×19.0 mm×18.8 mm70.0 mm×19.0 mm×18.8 mm

  • Hex Socket Size: 12.50 mm12.50 mm flat-to-flat ×8.50 mm×8.50 mm depth (ideal snug sliding fit for 12.4–12.44 mm12.4–12.44 mm male shafts)

  • Underside Recesses: 13.5 mm×13.5 mm×2.0 mm13.5 mm×13.5 mm×2.0 mm square pocket + ∅10.0 mm×8.8 mm∅10.0 mm×8.8 mm circular counterbore

  • Center Fastener: ∅5.60 mm∅5.60 mm through-hole for standard M5 screws/bolts

Recommended 3D Print Settings:

  • Material: PETG, ABS, ASA, or PA-CF (Nylon) recommended for mechanical strength and temperature resistance.

  • Perimeters / Wall Count: 4 to 6 walls (Crucial: ensures the entire cylindrical boss surrounding the hex pocket is 100% solid perimeter lines for maximum torque handling).

  • Infill: 30% – 50% Gyroid or Cubic.

  • Layer Height: 0.16 mm – 0.20 mm (for sharp hex edges).

  • Print Orientation: Flat on the bed with the boss pointing up.

  • Supports: Optional for the shallow 2.0 mm2.0 mm underside recess (most printers can bridge this easily without supports).

Tagi