Heavy Duty Reinforced Replacement Cam / Lever Arm (12.5mm Hex Drive)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy Duty Reinforced Replacement Cam / Lever Arm (12.5mm Hex Drive)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
A reinforced drop-in replacement for cast pot-metal lever arms / cam handles where the original thin hex collar cracked or sheared under torque.
Redesigned in Autodesk Fusion 360 with a solid 360∘360∘ reinforced collar (∅18 mm∅18 mm), generous stress-relief fillets, and exact tolerances.
Key Specifications:
Overall Dimensions: 70.0 mm×19.0 mm×18.8 mm70.0 mm×19.0 mm×18.8 mm
Hex Socket Size: 12.50 mm12.50 mm flat-to-flat ×8.50 mm×8.50 mm depth (ideal snug sliding fit for 12.4–12.44 mm12.4–12.44 mm male shafts)
Underside Recesses: 13.5 mm×13.5 mm×2.0 mm13.5 mm×13.5 mm×2.0 mm square pocket + ∅10.0 mm×8.8 mm∅10.0 mm×8.8 mm circular counterbore
Center Fastener: ∅5.60 mm∅5.60 mm through-hole for standard M5 screws/bolts
Recommended 3D Print Settings:
Material: PETG, ABS, ASA, or PA-CF (Nylon) recommended for mechanical strength and temperature resistance.
Perimeters / Wall Count: 4 to 6 walls (Crucial: ensures the entire cylindrical boss surrounding the hex pocket is 100% solid perimeter lines for maximum torque handling).
Infill: 30% – 50% Gyroid or Cubic.
Layer Height: 0.16 mm – 0.20 mm (for sharp hex edges).
Print Orientation: Flat on the bed with the boss pointing up.
Supports: Optional for the shallow 2.0 mm2.0 mm underside recess (most printers can bridge this easily without supports).
